Carpet Installation – To install first a cushion pad or rosin paper for underlayment
commercial grade , 2.88 MM thick with protective urethane
layer,
then install tackles strips to the floor, with its end extending
up the wall about 6 “, after roll out carpet to opposite wall
in smooth manner.
Painting – First prepare the surface, then a apply a coat of primer followed by
finish coat of painting – latex, satin finish,
Dry Wall – To install new dry wall – Fire Retardant – ASTM c – 840 standard,
apply mud, taping and skim coating,
Bath Room installation – Install new ceramic tiles on walls, floors,
Tub, Vanity, Showers, Faucets and accessories,
Windows Installation – Install new double hung windows,
Door Installation – Install new single entry and storm doors,
Concrete Work – To cut out existing cracked and disintegrated concrete surface,
then cart away debris, install wire mesh with tie bar, then pour
fresh concrete 5 inches – 3500 PSI
Roofing – Asphalt Shingles – Remove existing shingles, install 30 LBS roof felt,
replace with new shingles – three tabs or architecture,
install flashing on the perimeters of roof,
drip edge, ridge vents and Ice shields,